a combinational circuit, also called a combinational logic circuit, is a digital electronic circuit whose output is determined by present inputs only.

the output of a combinational logic circuit does not depend on the history of the circuit operation. in other words, a combinational circuit is a digital logic circuit whose output depends only on the present input values and does not depend on any feedback or previous input or output values.

in this chapter, we will explain the fundamentals of combinational circuits, and its block diagram, types, and applications. so, lets start with the basic definition of combinational circuits.

what is a combinational circuit?

a combinational circuit is a type of digital logic circuit whose output depends on the present input values only and does not depend on past input and output values. therefore, a combinational circuit is considered to not have a memory element in its circuit that stores previous inputs and outputs. instead, it consists of a certain number of input lines to apply current input values and a certain number of output lines.

the most important characteristic of a combinational circuit is that it does not have any feedback path between input and output. therefore, the combinational circuits can be categorized as open-loop systems.

block diagram of combinational circuit

the following figure depicts the block diagram of a combinational logic circuit.

here, we can see that there are only three key elements in the circuit diagram of a combinational circuit, they are −

input lines − the input lines are used to enter the input values into the combinational circuit.
processing unit − it is the main element that processes the input values depending on the type of the circuit. for example, a full adder adds three binary bits.
output lines − the output lines are used to take results generated by the circuit.

characteristics of combinational circuits

the following are the main characteristics of combinational circuits −

the output of a combinational circuit, at any instant of time, depends only on the present input values at that instant of time.
combinational circuits do not use any kind of memory element in their circuits. thus, the previous state of input and output values do not have any effect on the present operation of the circuit.
the output of a combinational circuit can be entirely predicted using its logical operation and input values.
combinational circuits produce an instantaneous output in response to any change in its input values.

types of combinational circuits

in digital electronics, the combinational circuits are important components of digital systems. depending on the functions performed, there are various types of combinational circuits. some common types of combinational circuits and their functions are explained below −

binary adders
binary subtractors
multiplexers (mux)
demultiplexers (demux)
encoders
decoders
comparators

in the following sections of this chapter, we will discuss briefly about each of these combinational circuits along with their functions.

binary adders

a binary adder is a combinational circuit that performs the addition of binary digits or bits. depending on the design and configuration, there are two types of binary adders namely, half adder and full adder.

half adder

the half adder is a combinational logic circuit with two inputs and two outputs. the half adder circuit is designed to add two single-bit binary numbers a and b. it is the basic building block for the addition of two single-bit numbers. this circuit has two outputs namely, sum and carry.

full adder

the full adder is designed to overcome the drawback of a half adder which is the ability to add only two bits. therefore, the full adder is a three-input and two-output combinational circuit. where, the inputs are two one-bit numbers a and b, and a carry c from the previous addition. the outputs are sum and carry output.

binary subtractors

a binary subtractor is a combinational logic circuit used to subtract one binary number from another. similar to binary adder, there are two types of binary subtractors namely, half-subtractor and full-subtractor.

half subtractor

a half subtractor is a combination circuit with two inputs (a and b) and two outputs (difference and borrow). it produces the difference between the two binary bits at the input and also produces an output (borrow) to indicate if a 1 has been borrowed. in binary subtraction (a-b), a is called a minuend bit and b is called a subtrahend bit.

full subtractor

the full subtractor is also a combinational circuit with three inputs a, b, and b_in, and two outputs d and b_out.

here, a is the minuend bit, b is the subtrahend bit, b_in is the previous borrow bit produced by the previous stage, d is the difference output and b_out is the borrow output.

multiplexers (mux)

a multiplexer is a special type of combinational logic circuit. it consists of n-data input lines, one output, and m-select lines. for a multiplexer, n = 2^m.

a multiplexer is a digital circuit that selects one of the n data inputs and routes it to the output line. the selection of one of the n data inputs is done by the select lines. depending on the digital code applied at the select lines, one out of "n" data inputs is selected and transmitted to the output line.

in some multiplexers, there is also an enable input e which is useful in cascading of multiple multiplexers.

depending on the number of input lines, there can be several types of multiplexers. some common types of multiplexers include 2:1 multiplexer, 4:1 multiplexer, 16:1 multiplexer, and 32:1 multiplexer.

demultiplexers (demux)

a demultiplexer performs a distribution operation i.e., it receives one data input and distributes it over several output lines.

a demultiplexer has only one input line, "n" output lines, and "m" select lines. at a time, only one output line is selected by the digital code applied to the select lines and the data input is transmitted to the selected output line.

demultiplexers can be classified into various types depending on the number of output lines. some commonly used types of demultiplexers include: 1:2 demultiplexer, 1:4 demultiplexer, 1:16 demultiplexer, and 1:32 demultiplexer.

encoders

an encoder is a combinational circuit that is designed to convert a piece of information into a binary code. an encoder has n number of input lines and m number of output lines, where n = 2^m.

an encoder generates an m-bit binary code corresponding to the digital input applied to it. in other words, an encoder accepts an n-input digital word and converts it into an m-bit another digital word.

examples of encoder include 4-to-2 encoder, octal-to-binary encoder, hexadecimal-to-binary encoder, priority encoder, etc.

decoders

a decoder is a combinational circuit that converts a binary code into a normal word like a decimal digit. a decoder typically consists of n input lines and m output lines, where the m = 2ⁿ.

decoders are widely used in display drivers, data distribution systems, etc.

some of the commonly used types of decoders are 2 to 4 decoder, 3 to 8 decoder, 4 to 16 decoder, bcd to seven segment decoder, etc.

comparators

a comparator is a combinational logic circuit developed to compare two binary numbers. comparators are mainly used in arithmetic and control circuits to perform comparison or logical operations.

a comparator, as its name suggests, compares the input values and checks whether they are equal or one input is greater/less than the other input.

limitations of combinational circuits

combinational circuits have several advantages such as fast operational speed, simpler circuit, predictable operation, etc. however, they do have several limitations too, some of which are listed below −

combinational circuits do not have any memory element. they are incapable to store history of circuit operation.
combinational circuits cannot be used to implement certain highly complex logic functions.
combinational circuits do not have any feedback mechanism. that makes the combinational circuits to have limited functionality.
at large scale, combinational circuits have several design complexities that can result in poor performance and inefficient resource utilization.

applications of combinational circuits

combinational circuits are the fundamental building blocks in various digital devices and systems. they are widely used in several digital devices in which combinational circuits are used −

microprocessors and microcontrollers
digital computers
calculators
digital communication systems
keyboards
smartphones and digital watches, etc

conclusion

a combinational logic circuit is a key component in various digital devices and systems. it can be defined as an interconnected system of digital components whose output depends only on the present states of inputs and it does not depend on past input and output values.

in this chapter, we explained the characteristics, limitations, and applications of combinational circuits.

Save or share this article